Pump Dispenser Wall Mount for Hand Sanitizer (Pack of 4)
Made in USA
Servicing a wide range of industries and offering robust reseller discounts, Testrite is very proud to be an American manufacturer with an extraordinary reputation for quality, value and reliability. Testrite sources the finest quality components, and because Testrite manufactures in the U.S., the supply chain is shorter, and greener.
Product Features
- 4" W - Supports hand pump bottles up to 4-7/8" D with 1-3/16" diameter necks before cap is applied
- Includes a black rubber washer for 15/16" diameter necks before cap os applied
- Steel L-Bracket with 4 mounting holes. Wall Mount hardware included.
- Packed as a set of 4
Product Details
Weight | 18 lbs. |
Material | Steel, Vinyl |
Color | Silver |
Pack Size | 1 |
Size | Medium |
Installation Instructions
For installation onto Plasterboard / Drywall:
Professional installation is recommended.
- Hold the Hand Sanitizer Wall Mount in the desired location for mounting along the plasterboard/drywall.
- With a pencil, mark the locations of both holes onto the plasterboard/drywall.
- Create clearance holes through plasterboard/drywall using 3/8” drill bit.
- Mount the Hand Sanitizer Wall Mount to the plasterboard/drywall using the provided molly anchors.
- Separate the pump dispenser head from the bottle, and attempt to attach to the wall mount bracket. Slide the pump dispenser through the hole in the steel plate and re-attach the pump dispenser head. If the hole is too large and the dispenser falls through, use the included washer to narrow the hole as shown.
For installation onto Wood / Stud:
Professional installation is recommended.
- Hold the Hand Sanitizer Wall Mount in the desired location for mounting along the plasterboard/drywall.
- With a pencil, mark the locations of both holes onto the plasterboard/drywall.
- Create clearance holes through plasterboard/drywall using 3/8” drill bit.
- Mount the Hand Sanitizer Wall Mount to the stud using the provided wood screws
- Separate the pump dispenser head from the bottle, and attempt to attach to the wall mount bracket. Slide the pump dispenser through the hole in the steel plate and re-attach the pump dispenser head. If the hole is too large and the dispenser falls through, use the included washer to narrow the hole as shown.
QUESTION & ANSWERS
Ask a Question